solid clinic and office piece
Wore this on the shark-mesh bracelet to a dental conference with a charcoal suit. Even at 15.6mm thick, the rounded bezel edge lets my dress shirt cuff slide past it, and the dial gets plenty of second looks.
提交需求後,我們的專屬顧問將向合作夥伴確認庫存,並以電子郵件回覆您,通常在 1 個工作天內。
腕錶
Ocean Crawler Decompression Timer Core Diver - 黑色是一款 44mm 潛水錶,配備黑色錶盤,搭載瑞士製 Sellita SW200-1 自動上鍊機芯。具備 600 公尺防水性能與藍寶石水晶錶鏡。它屬於我們 Expedition 系列中的 Hour IV, Dive:游泳、帆船運動與海灘旅行的自然之選。
黑色錶盤奠定基調,搭配藍寶石單向旋轉錶圈,並鑲嵌於 44mm 的 316L 不鏽鋼錶殼中。寬 44mm、厚 15.6mm、錶耳間距 50mm,佩戴於腕間時極具存在感。
內部搭載瑞士製造 Sellita SW200-1 自動上鍊機芯,振頻 28,800 vph,動力儲存約 40 小時。透過腕部擺動自動上鍊,無需電池,僅靠為精準度逐一調校的機械心臟。
每一只 Ocean Crawler 都經過水壓測試,此款的防水深度達 600 公尺(60 ATM)。這足以應付真正的休閒與技術潛水、自由潛水及槍魚釣魚。氦氣排氣閥使其可適用於飽和潛水與減壓艙。單向旋轉錶圈與明亮的 Super-LumiNova 夜光塗料,即使在黑暗的水下也能清晰掌握經過時間。
專為追求專業工具錶的潛水者與愛好者打造,具備真正的防水深度、瑞士級機芯,以及即使在水面上仍能引人注目的設計。
全新、附包裝盒與保固,美國境內免運費。
值得了解
A Swiss-made Sellita SW200-1 automatic running at 28,800 vibrations per hour with about a 40-hour power reserve. It is self-winding, so there is no battery to replace.
It is rated to 600 metres (60 ATM) and pressure-tested, so it is suitable for recreational and technical scuba diving, freediving and spearfishing. Have the gaskets checked periodically to keep that rating.
The case measures 44mm (15.6mm thick, 22mm lug width) — a bold size that suits larger wrists (roughly 17.5 cm / 6.9 in and up). Our watch size guide (/pages/watch-size-guide) explains how to measure your wrist.
It has a black dial, framed by a sapphire unidirectional rotating bezel, under an anti-reflective sapphire crystal.
It pairs 600 metres (60 ATM) of tested water resistance with a full sapphire bezel and sapphire crystal, a serious tool-watch build and Swiss Super-LumiNova, so it performs underwater and still looks refined on land.
The bezel and key dial markers carry Swiss Super-LumiNova, so elapsed-time tracking and reading the time stay clear in dark or murky water.
Yes. Other versions we carry include the Ocean Crawler Decompression Timer Core Diver - Black DLC. Availability changes with stock, so the collection page always shows what is in stock today.
On the ChronoSeasons dial it sits at Hour IV — Dive, part of the Expedition season, and suits swimming, sailing, beach travel and everyday wear.
來自專欄
錶主心得
Wore this on the shark-mesh bracelet to a dental conference with a charcoal suit. Even at 15.6mm thick, the rounded bezel edge lets my dress shirt cuff slide past it, and the dial gets plenty of second looks.
The colored decompression rings pop way more in coastal sunlight than in the studio photos. Been wearing it to dinner and on the firehouse off-days, and it sits great on my 7-inch wrist.
Hi Vincent, thank you for your service at the firehouse! Glad the Decompression Timer is getting plenty of wrist time.
The black base dial with colorful decompression rings makes strap matching fun. I wear it on the stock shark-mesh bracelet for court days in Massachusetts, then swap to the included rubber strap or a yellow FKM band on weekends.
I have always wanted a vintage decompression diver, but I prefer modern 600m water resistance and a reliable Sellita SW200-1 caliber. At 44mm wide and 15.6mm thick, the short lug-to-lug keeps the case centered on my wrist. The 4.0mm anti-reflective sapphire crystal and 120-click C3 lumed sapphire bezel are top tier, with zero backplay. Over two weeks of flying trips, accuracy has stayed at +2 seconds per day.
I wear suits and blazers to school board meetings, and the black dial with the subtle decompression color rings adds a bit of personality without looking loud. Fits my wrist comfortably on the mesh bracelet.
Sized the 22mm shark-mesh bracelet for my wrist in ten minutes, and it gives the Decompression Timer a heavy retro look. Swapping to the included rubber strap or a grey NATO brings out the colors on the dial.
After twenty-two years in the Air Force, I am a sucker for busy technical dials that look like flight instruments. The concentric decompression rings against the matte black face give me that exact vibe, and the Sellita SW200-1 keeps spot-on time.
The 44mm by 15.6mm 316L steel case is solidly built, with a flush helium escape valve and clean brushing. Printing on the black decompression scale is razor-sharp under the 4.0mm AR sapphire crystal, and the 120-click bezel locks in tightly.
Hi Austin, thanks for the review! Glad the crisp dial printing and 600m case construction hit the mark for you.